Your dress size comes from three numbers: bust, waist and hips. Measure each one over the right undergarments, with the tape level and relaxed, then read them against the brand’s own size chart, because a number on a label means something different from one house to the next. At Lily & Taylor, a New York Garment District occasion-wear label, we cut suits, dresses, blouses and statement hats in sizes 4 to 24, and the hats are designed to coordinate with the garments. This guide gives you the method we would hand a friend before a wedding, a gala or a Sunday service.
TL;DR
- Measure bust, waist and hips with a soft tape, a mirror and the undergarments you plan to wear with the dress.
- Keep the tape level and snug, never tight, and breathe normally at the waist.
- Check whether a chart lists body measurements or garment measurements before you compare anything.
- When your three numbers land in different sizes, size to the largest one for a fitted, non-stretch dress and adjust the rest.
- Read each brand’s chart every time: a size 6 at one label is not a size 6 at another.
Table of Contents
- What you need before you start
- The three core measurements
- Two extra measurements worth taking
- How to read a size chart without being misled
- When your measurements fall into different sizes
- Why a size 6 is not always a size 6
- Understanding 18W and plus sizes
- Measuring for the occasion you are dressing for
- Common mistakes to avoid
- Our point of view
- Find your fit at Lily & Taylor
- FAQ
- Sources
What you need before you start
The tools are simple, and the details are what make the numbers honest.
- A soft, flexible measuring tape. A steel builder’s tape will not curve around you. A fabric or fiberglass tape will.
- A full-length mirror. It lets you see whether the tape sits level all the way around. The Knot’s guide quotes a bridal-salon executive who calls a mirror essential for confirming the tape is in the right spot.
- The right undergarments. Wear a regular, non-padded bra and the foundation pieces you will actually wear under the dress. The same guide recommends matching the undergarments and shoes you will wear on the day.
- A helper, if you can. A second person keeps the tape level at your back, which is where most solo measuring goes wrong.
- A pen and paper. Write each number down as you take it. Measure twice and use the number that repeats.
Stand tall, feet together, arms relaxed at your sides. Do not hold your breath or pull your stomach in. A flattering number that you cannot sit down in is no use at a long reception.
The three core measurements
Bust
Wrap the tape around the fullest part of your chest, under your arms and across the widest part of your back. According to The Knot’s measuring guide, the tape should run level rather than sloping, and you should wear a regular, non-padded bra.
The common mistake is letting the tape ride lower at the back than the front. Check the mirror, or ask your helper to look from behind. The tape should rest against you without pressing into the skin.
Bust is the measurement that matters most for a fitted bodice, a blazer or a suit jacket. Shoulders and upper chest are hard to alter later, so treat this number with respect.
Waist
Your natural waist is the narrowest part of your torso, usually just above the belly button. If you cannot find it, bend to one side and notice where your body creases. That crease is your natural waist. Wrap the tape there and breathe out naturally. The Knot advises against sucking in.
Many dresses with a belt, a pleated skirt or a defined waistline are built around this number. If you are choosing something like our Fine Pleated Mid-Length Dress with Belt, the waist and hip measurements are the two to have in front of you when you read the chart.
Hips
Stand with your feet together and wrap the tape around the widest part of your hips and backside. Keep it level and not pulled tight. The same expert guide stresses checking the hip measurement from the side, in the mirror, to make sure the tape is sitting at the right height. Hips are often fuller lower than people expect, so move the tape up and down once before you settle.
If you carry weight in your thighs, take a second reading about where your thighs are widest and note it. A pencil skirt or a sheath dress needs room there.
Two extra measurements worth taking
Bust, waist and hips decide your size. These two decide how a dress sits on you.
- Length from shoulder to hem. Hold the tape at the top of your shoulder, beside your neck, and run it down to where you want the hem to land, in the shoes you plan to wear. Mid-length, knee-length and tea-length each fall differently, so this tells you whether a dress will work for your height.
- Shoulder width. Measure across your back from one shoulder point to the other. This matters most for jackets and suits, where a seam that sits off the shoulder is obvious.
Neither number replaces the chart, but both help you read the product description with confidence.
How to read a size chart without being misled
Once you have your numbers, the chart is where most people go wrong. The first question is what the chart is measuring.
YourSizer’s guide explains the difference. A chart may list body measurements, which you compare directly to your own, or garment measurements, which describe the dress laid flat and already include built-in ease, so the numbers run larger. Most charts do not say which they are, so look for a note near the table. If a garment’s bust measurement is several inches larger than yours, you are probably looking at a garment chart.
Then follow four habits:
- Match your largest relevant measurement to the size row. Check the units too, inches or centimeters, and the region, US or UK or EU.
- Read the fit notes. Phrases like “runs small” or “non-stretch” change the answer.
- Think about fabric. A stretch knit and a structured woven dress in the same size can fit very differently, as LookerDress explains, so the cut of the dress decides which measurement wins.
- Use the brand’s own chart, not a general one. A general chart is a starting point at best.
We publish our own size guide for exactly this reason. It is the chart to hold your numbers against when you shop our range, which runs from 4 to 24.
When your measurements fall into different sizes
Very few people are one size all the way down. A fuller bust with a narrower waist, or the reverse, is ordinary. There are two practical ways to decide.
Size to the largest of the three. The Knot’s experts recommend this when bust, waist and hips correspond to different sizes. YourSizer’s rules of thumb agree for fitted, non-stretch pieces, while stretch or relaxed styles can often work in the smaller size.
Size to the measurement that is hardest to change. TextToolz explains that taking in a waist or shortening a hem is straightforward, while letting out a shoulder seam or adding room across the chest generally is not. So if your bust is the larger number, buy for your bust and let a seamstress refine the waist.
Here is how that plays out in practice.
| Your situation | Dress or jacket style | Where to start |
|---|---|---|
| Bust is the largest number | Fitted bodice, blazer, suit jacket | Choose the size that fits your bust, then adjust the waist |
| Hips are the largest number | Sheath, pencil skirt, pleated skirt | Choose the size that fits your hips, then take in the bodice if needed |
| Waist is the largest number | Belted dress, wrap or A-line | Choose the size that fits your waist, since the skirt will skim from there |
| All three in the same size | Any | Confirm length and shoulder width, then choose with confidence |
For a suit, which is two pieces, you may even choose a different size for the jacket and the skirt or trousers. That is simply how a good fit works, and it is no cause for worry.
Why a size 6 is not always a size 6
It can feel as if you are failing the chart when a dress does not fit. Usually the chart is simply different from the last one.
US dress sizes are not set by law. Voluntary industry tables, such as the ASTM D5585 standard for misses sizes 00 to 20, give apparel designers a baseline, but each label cuts its own patterns for its own fit model and customer. Over the decades, labels have also drifted toward larger measurements under smaller numbers, a habit known as vanity sizing. Wikipedia’s overview of US clothing sizes notes that sizes vary by manufacturer, sometimes by a full inch up or down.
One comparison shows how much. Sizely compared six brands’ official charts in July 2026 and found a size 6 spans a 35 to 36 inch bust, a 27.5 to 28.5 inch waist and 37.5 to 39 inch hips. Because consecutive sizes step about an inch apart, a one-inch difference between brands is a whole size.
The lesson is practical: keep your measurements, not your size number, as your constant. Your size is the answer a particular chart gives you on a particular day.

Understanding 18W and plus sizes
Women’s plus sizing uses a W after the number, and it often pairs with the X-sizes. Sizechart.com’s US plus-size chart lists 18W as equivalent to 2X, with a bust of 45 to 47 inches, a waist of 36 to 38 inches and hips of 47 to 49 inches. The same chart places 14W with 1X and 26W with 4X.
Treat those figures as a guide to the range, not a promise. Plus ranges vary by brand even more than straight sizes, and a W size is cut with different proportions from a misses size, with more room through the bust, the arm and the hip. So the method above matters even more:
- Measure bust, waist and hips as described.
- Measure the upper arm if you plan to wear a fitted sleeve, since a sleeve that binds is the quickest way to spoil a day at a wedding or a long service.
- Check the shoulder width for jackets.
- Compare against the brand’s chart for the exact piece.
Our sizes run from 4 to 24 and S to 4X, and fit for every silhouette is central to how we design. If you are dressing for work, our guide to plus size work outfits goes deeper on fit and fabric.
Measuring for the occasion you are dressing for
The number is the same, but the questions you ask of it change with the event.
- Weddings, anniversaries and milestone birthdays. You will sit, stand, dance and hug for hours. Leave enough ease at the bust and hips to move comfortably, and measure in the shoes you will wear. Our guide to wedding guest dresses helps with the look once the fit is settled.
- Mother of the bride or groom. You will be photographed from every angle, so shoulder width and sleeve comfort matter as much as the dress size. A matching jacket or hat completes the outfit.
- Galas and holiday parties. Fitted silhouettes look striking, and a precise waist and hip reading helps. Measure in the foundation garments you will wear.
- Church services, Easter and Christmas. Many women add a hat. Our hats are designed to coordinate with the garments, so you can choose the dress or suit first and let the hat follow.
- Graduations, formal daytime events and spring celebrations. Lighter fabrics and softer cuts often call for a little more ease, so lean toward the comfortable end of your size.
- The office. A suit is where jacket and bottom sizes most often differ. Add a blouse and check that the bust and sleeve work under the jacket.
Common mistakes to avoid
- Measuring over bulky clothing, which adds inches that are not yours.
- Pulling the tape tight, which gives a number your body will not live with.
- Letting the tape tilt at the back. Use the mirror.
- Measuring once. Take each number twice.
- Comparing body numbers to a garment chart, or the reverse.
- Choosing by the size on your last dress rather than by your measurements.
- Ignoring the fabric. A dress with no stretch needs a more generous choice than one with give.
Our point of view
We have spent more than three decades making occasion wear in New York’s Garment District, and the question we hear most is how to find the right size. Our answer is that the number on the label matters less than the numbers on your tape.
Measure bust, waist and hips carefully, and keep those figures somewhere you can find them. Then read them against the chart for the piece you are considering. We offer sizes 4 to 24 and S to 4X, because a good fit should not depend on being a particular shape.
The details of a garment are what make fit feel effortless: the fabric, the cut, the way a jacket sits on the shoulder. When you can see them in person, you should. Our New York showroom lets you try on garments, and online our size guide gives you the same starting point.
A dress that fits well lets you stop thinking about it and enjoy the day.
Mark
Find your fit at Lily & Taylor
Once you have your measurements, our dresses and suits are made for weddings, galas, anniversaries and Sunday best, in sizes 4 to 24. Take your numbers to our size guide, then choose a dress such as the Fine Eyelet Dress with Removable Belt in green, and add a matching hat to finish the outfit. Flat-rate shipping and flexible payment options like Shop Pay and Afterpay keep checkout simple.
Shop the Fine Pleated Mid-Length Dress w/ Belt 5245
If you prefer to try before you decide, visit our New York showroom, where our team can help you with fit in person.
FAQ
Which measurements do I need to find my dress size?
You need three: bust, waist and hips. Take them with a soft tape, over the undergarments you will wear, and compare them to the brand’s size chart. Adding shoulder width and the length from shoulder to hem helps with jackets and with choosing a hem length.
What if I am between sizes?
For a fitted, non-stretch dress, choose the size that fits your largest measurement, since experts recommend sizing up when your numbers fall in different sizes. Waists and hems are generally easier to adjust than shoulders or the chest. Stretch fabrics are more forgiving, so the smaller size may work.
Is 18W the same as 2X?
On one widely used plus-size chart, 18W corresponds to 2X, with a bust of 45 to 47 inches. Plus ranges differ by brand, so confirm with your own bust, waist and hip measurements against the chart for the specific garment.
Should I measure over clothes?
No. Measure over the undergarments you will wear with the dress, or over close-fitting clothing, and never over bulky layers. Bulk adds inches that are not part of your body and leads to a dress that is too large.
Why does my size change from brand to brand?
US sizing is voluntary, and each label cuts to its own fit model, which is why a size 6 can differ by an inch or more across brands. Always use the brand’s own chart and your own measurements rather than the size on your last dress.
Sources
- How to Measure For a Dress At Home, The Knot
- How to Read a Size Chart Correctly, YourSizer
- Dress Size Chart: US, UK and EU Sizes and How to Measure, LookerDress
- Body Measurements or Garment Measurements? TextToolz
- D5585 Standard Tables of Body Measurements for Adult Female Misses Figure Type, ASTM
- U.S. standard clothing size, Wikipedia
- Why a Size 6 Is Not a Size 6 Across Brands, Sizely
- US Plus Size Chart, Sizechart.com
